Freezer gasket

Discussions on how to get parts for the Beneteau Oceanis 40 sailing boat.
Post Reply
Luis Sa
Site Admin
Posts: 58
Joined: Thu May 04, 2017 4:12 am

Freezer gasket

Post by Luis Sa » Sat Sep 16, 2017 9:17 pm

Hello,

I am trying to replace the gasket that goes under the lid of the freezer. As we may see the seal is not in good state.

gasket.jpg

I am looking for profiles that can be used. When I fix this I will complete this post.

Regards, Luis

Luis Sa
Site Admin
Posts: 58
Joined: Thu May 04, 2017 4:12 am

Re: Freezer gasket

Post by Luis Sa » Wed Dec 27, 2017 11:34 pm

Hello,

This is what I found about the gasket. The external size is 55 cm x 38,5 cm as shown here:

frigo2.jpg

Here is one corner:

frigo1.jpg

The gasket does not uses screws or glue. It is inserted in a recess as shown here:

frigo3.jpg

I made a sketch of the profile. The gasket itself has the dimensions of 12mm x 8mm:

frigo0.jpg

I will order this profile from China (AliExpress). It is the best that I could find:

frigo4.jpg

I will post here the progress on this problem.

Regards, Luis

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest