Water Impeller

Discussions on how to get parts for the Beneteau Oceanis 40 sailing boat.
Post Reply
Luis Sa
Site Admin
Posts: 845
Joined: Thu May 04, 2017 4:12 am

Water Impeller

Post by Luis Sa » Sat Sep 16, 2017 9:14 pm

Hello,

The impeller for the 3JH5E engine has the Yanmar reference 129670-42531. The lid of the water pump uses an o-ring with Yanmar reference X0506590-01.

original-impeller.jpg

Sometimes the original impeller comes with the o-ring. I keep one o-ring in the boat. Some impellers have an inner thread so that a special tool/screw is needed to remove the impeller as referenced to in the engine manual. I also have this small tool on board.

impeller-screw.jpg

Osculati has the equivalent part 16.194.05 which I have used ultimately. It has not the thread and I use a pliers to remove it. Sometimes the piece is destroyed when removing. So, if it looks OK on inspection I will not remove it.

Regards, Luis

Post Reply