How to update Nmea2wifi firmware

Discussion and support for the Nmea2Wifi multiplexer - a 2-input Nmea 0183 wifi multiplexer.
carlo194
Posts: 15
Joined: Sat Feb 02, 2019 3:55 pm
Location: Rome

Re: How to update Nmea2wifi firmware

Post by carlo194 » Thu Feb 07, 2019 1:22 pm

Hi Luis,
Don’t worry, I write when I discover something but I am not pressed!


I bought a kit that I already assembled (nice work you have done).


I am receiveng today3 new wemos (I wanted to try them anyway) and I will test the procedure with another one.

If I discover that the one that came with the kit is not working, you owe me one wemos, otherwise I’ll wait untill you are confortable at home!

Keep travelling in Greece and enjoy.

Carlo

Luis Sa
Site Admin
Posts: 154
Joined: Thu May 04, 2017 4:12 am

Re: How to update Nmea2wifi firmware

Post by Luis Sa » Thu Feb 07, 2019 6:37 pm

Hello,

Thank you Carlo.

Regards, Luis

carlo194
Posts: 15
Joined: Sat Feb 02, 2019 3:55 pm
Location: Rome

Re: How to update Nmea2wifi firmware

Post by carlo194 » Fri Feb 08, 2019 12:00 pm

At first attempt, the behaviour of the new wemos is identical to the other one.....
I’ll study wemos and windows 10: if I discover something I’ll tell you, otherwise l’ll wait for you..

até logo.

C.

carlo194
Posts: 15
Joined: Sat Feb 02, 2019 3:55 pm
Location: Rome

Re: How to update Nmea2wifi firmware

Post by carlo194 » Mon Feb 11, 2019 1:02 pm

You know what?

I read that some usab cable do not carry rx and tx but only power.......
I’ll check.

C.

Luis Sa
Site Admin
Posts: 154
Joined: Thu May 04, 2017 4:12 am

Re: How to update Nmea2wifi firmware

Post by Luis Sa » Mon Feb 11, 2019 3:44 pm

Hello Carlo,

As I have referred to in a previous answer - "Check if the USB cable supports data and power". That is probably the cause of your problem.

Saludos, Luis

carlo194
Posts: 15
Joined: Sat Feb 02, 2019 3:55 pm
Location: Rome

Re: How to update Nmea2wifi firmware

Post by carlo194 » Mon Feb 11, 2019 4:09 pm

That’s it! You where right.

Now I’ll follow the instructions and install everything. If you do not hear from me, that means everuthing went right!

Obrigado!

Carlo

Post Reply