Problem with the equipment

Discussion and support for the Nmea4Wifi multiplexer - a 4-input Nmea 0183 wifi multiplexer.
Post Reply
Cormoran
Posts: 3
Joined: Sat Feb 23, 2019 5:49 am
Location: Hungary

Problem with the equipment

Post by Cormoran » Thu Mar 14, 2019 8:08 pm

Dear Luis,

I have any problem with my nmea4wifi equipment. If I switch on with power only one green led light continuously and the small red on the voltage converter and nothing happen. I trtied to reset the WeMos too, but the pushing boot button there is no any reaction.
Can you help me? Many thanks!

Regards, George

NMEA4WIFI.jpg

Luis Sa
Site Admin
Posts: 141
Joined: Thu May 04, 2017 4:12 am

Re: Problem with the equipment

Post by Luis Sa » Thu Mar 14, 2019 8:51 pm

Hello George,

Something is very wrong! Before we discuss how to solve that could you do this test?

1) Remove the Esp32 module from its socket
2) With an USB cable power the module from a PC or from a phone charger
3) Press and Hold for about 3 seconds the button "Boot" and then release it
4) Check if the Nmea4Wifi network is created

I wait for your feedback

Regards, Luis

Cormoran
Posts: 3
Joined: Sat Feb 23, 2019 5:49 am
Location: Hungary

Re: Problem with the equipment

Post by Cormoran » Thu Mar 14, 2019 9:09 pm

Dear Luis,

Yes, I tried this process, but looks like there is no communication. I tried with Arduino IDE because I can check it with this, if I push the reset button, on the screen I can check the reset process, but there is nothing happened. :-(

Post Reply