Search found 13 matches

by Cormoran
Sun Dec 01, 2019 9:28 am
Forum: Nmea4Wifi
Topic: Nmea 4 and Garmin GPS Antenna
Replies: 3
Views: 9819

Re: Nmea 4 and Garmin GPS Antenna

Did you set up the Baud rate correctly? I had before same problem, but after the Baud rate setting on bought, solved the problem... From the users guide: “ NotE: When connecting this antenna to a GPSMAP 2000, 3000, 4000, or 5000 series device, you must limit the update rate (see page 5). If the upda...
by Cormoran
Sun Dec 01, 2019 9:21 am
Forum: Nmea4Wifi
Topic: How and for what use your NMEA_x_Wifi device?
Replies: 0
Views: 11123

How and for what use your NMEA_x_Wifi device?

Please write down what kind of applications or programs you are using with it, what is experiences etc.
by Cormoran
Sun Nov 10, 2019 2:46 pm
Forum: Designing Wifi Multiplexers
Topic: About Seatalk1 to Nmea183 Conversion of Depth
Replies: 4
Views: 14540

Re: About Seatalk1 to Nmea183 Conversion of Depth

Dear Luis, Thank you for your "exhaustive" answer, that was very detailed, and correct. Many times I want to understand all but I couldn't understand very deep the Thomas Knauf documents about the Seatalk datagrams but the Seatalk to NMEA183 or NMEA183 to Seatalk translation too. (I think the main r...
by Cormoran
Tue Nov 05, 2019 10:11 am
Forum: Nmea4Wifi
Topic: Struggle with OTA update
Replies: 17
Views: 38028

Re: Struggle with OTA update

Hello Luis, I seen on the new firmware today only (3.1) I'm upgraded the "old" 2.7 on my equipment and yuheeeeee! Looks like working well correctly, not only my PC. Working on my Android and iPad too much better and FASTER than before! The simulation mode is great and working very fast on my Android...
by Cormoran
Fri Sep 13, 2019 4:58 pm
Forum: Nmea4Wifi
Topic: Struggle with OTA update
Replies: 17
Views: 38028

Re: Struggle with OTA update

Hello Luis, The problem was in my system with the newer version of esp32 core. Arduino refreshing sometimes the board "drivers". I used before to nmea4wifi firmware update the last version of esp32 core (1.0.3 not the 1.0.0) in Arduino Ide. You may use the 1.0.0 version too, that's why you have no p...
by Cormoran
Fri Sep 13, 2019 1:59 pm
Forum: Nmea4Wifi
Topic: Struggle with OTA update
Replies: 17
Views: 38028

Re: Struggle with OTA update

Dear Luis, I tried some times to OTA update, but doesn't work well my equipment. We talked about many times and there was many of magical problem with the wifi connect and the data too. I can't use my equipment all of the summer, because doesn't work correctly. When you send the last firmware versio...
by Cormoran
Thu Apr 25, 2019 8:05 pm
Forum: Nmea4Wifi
Topic: Seatalk to nmea183 depth conversion?
Replies: 18
Views: 41799

Re: Seatalk to nmea183 depth conversion?

Dear Luis,

Tomorrow I can try on my i40 but only demo mode because my boat is it in my garden now. But should be give correct information too. Let see...

Regards, George
by Cormoran
Tue Apr 23, 2019 7:30 am
Forum: Nmea4Wifi
Topic: Seatalk to nmea183 depth conversion?
Replies: 18
Views: 41799

Re: Seatalk to nmea183 depth conversion?

Dear Luis, As I send to you a few video before, there is one of them about the same translate problem. Not only the speed and depth but the temperature data are wrong too) I seen the translated Seatalk data only one time correctly if I can to see only one time the accumulated mileage between the tra...
by Cormoran
Sun Apr 14, 2019 12:17 pm
Forum: Nmea4Wifi
Topic: Arduino mega
Replies: 8
Views: 20401

Re: Arduino mega

Dear Alain,

Do you have any result with Mega?
by Cormoran
Fri Apr 12, 2019 8:36 am
Forum: Nmea4Wifi
Topic: Problem with the equipment
Replies: 10
Views: 28590

Re: Problem with the equipment

Dear Luis,

Thank you for your help, I was write to you a private letter after the equipment change.

Regards, George