Hello,
There was a bug. Version 2.2 will do it. Thank you for calling our attention to this bug.
Regards, Luis
Search found 437 matches
- Sun Apr 21, 2024 8:48 pm
- Forum: Designing Wifi Multiplexers
- Topic: Change Default SSID IP from 192.168.4.1
- Replies: 2
- Views: 239
- Sun Apr 21, 2024 8:39 pm
- Forum: N2K0183
- Topic: N2K0183 wifi setup
- Replies: 1
- Views: 135
Re: N2K0183 wifi setup
Hello,
Yes, with TCP the multiplexer can only talk to one device. With UDP the multiplexer can send data to multiple devices. Normally I suggest TCP for device to multiplexer communication and UDP for multiplexer to devices communication.
Regards, Luis
Yes, with TCP the multiplexer can only talk to one device. With UDP the multiplexer can send data to multiple devices. Normally I suggest TCP for device to multiplexer communication and UDP for multiplexer to devices communication.
Regards, Luis
- Sun Apr 21, 2024 6:11 pm
- Forum: N2K0183
- Topic: Cable to connect to the Nmea2000 backbone
- Replies: 2
- Views: 3389
Re: Cable to connect to the Nmea2000 backbone
Hello, Sorry but I have not seen your post till today. You can place solder between 2 pads in the PCB of the multiplexer and its behaves as a terminator. Doing this and if the multiplexer is one one end of the backbone you do not need for a terminator on this side. See the pictures (I placed a gray ...
- Tue Apr 16, 2024 10:10 am
- Forum: Designing Wifi Multiplexers
- Topic: How to Flash a blank ESP32 module
- Replies: 0
- Views: 70
How to Flash a blank ESP32 module
Hello, This topic concerns the multiplexers that use the ESP32 module - NMEA3WIFI, NMEA4WIFI and N2K0183. I took the case of the NMEA4WIFI to describe this process, but the method is identical to the other two multiplexers. I use this method with Windows 10 and Windows 11. 1. Unzip the attached ZIP ...
- Thu Mar 28, 2024 7:42 pm
- Forum: Designing Wifi Multiplexers
- Topic: Nmea0183 output buffer and sentence dropping
- Replies: 0
- Views: 197
Nmea0183 output buffer and sentence dropping
Hello, Starting with versions: 8.2 of NMEA2WIFI 2.3 of NMEA3WIFI 6.2 of NMEA4WIFI 2.0 of the N2K0183 we changed the operation of the Nmea0183 serial output buffer (referred to as P2 in the N2K0183, P3 in the NNMEA2WWIFI and NMEA3WIFI and P5 in NMEA4WIFI). We use the example of the NMEA4WIFI multiple...
- Tue Mar 12, 2024 12:13 am
- Forum: N2K0183
- Topic: N2K0183 as a Tool to Analyse the N2K bus
- Replies: 3
- Views: 15073
Re: N2K0183 as a Tool to Analyse the N2K bus
Hello Tedfiddle, As per my email, you can use use the Actisense Reader to get information on the data that travels on the NMEA2000 bus. You need to Select Unidirectional ActisenseB in the RAW settings and check the box USB so that data is sent through the Serial P2 port (echoed in the USB port). In ...
- Tue Mar 05, 2024 10:10 pm
- Forum: Nmea2Wifi
- Topic: How to update Nmea2wifi firmware
- Replies: 29
- Views: 72475
Re: How to update Nmea2wifi firmware
Hello Waldemar, That driver is not only necessary to update the firmware using a USB cable but it is also necessary if the multiplexer has to receive or send nmea0183 data from/to a PC, through USB. I don't know if it is possible to install the driver on Windows11 ARM. Just saw here that some people...
- Mon Mar 04, 2024 9:43 am
- Forum: Nmea4Wifi
- Topic: Connecting to router in STN mode breaks NMEA out on p5
- Replies: 20
- Views: 2169
Re: Connecting to router in STN mode breaks NMEA out on p5
Hello Paul, I need to discuss the Heading Sentences with Dagnall. I answered too fast without noting to the requirement that you would not like to setup ST>P5. You should note that this is a very customised requirement and that could only be made once and not supported on future updates. I suggest w...
- Mon Mar 04, 2024 12:51 am
- Forum: Nmea4Wifi
- Topic: Connecting to router in STN mode breaks NMEA out on p5
- Replies: 20
- Views: 2169
Re: Connecting to router in STN mode breaks NMEA out on p5
Hello Paul, Good to hear! And thanks to report it to us! Let me tell you that me and Dagnall have been working to optimize even further the internal operation of the NMEA4WIFi multiplexer and we will possibly upload a new firmware in the next days. In regard to adding the 2 sentences to the Filters,...
- Sun Feb 25, 2024 10:17 pm
- Forum: Designing Wifi Multiplexers
- Topic: Open Networks & Hard Reset
- Replies: 0
- Views: 135
Open Networks & Hard Reset
Hello, Starting with versions: 8.2 of NMEA2WIFI 2.3 of NMEA3WIFI 6.2 of NMEA4WIFI 2.0 of the N2K0183 it will be possible to: create an open (not protected) AP only network and/or also connect to an open (non protected) external network In order to achieve that, you just enter the string NULL in the ...