Search found 432 matches
- Tue Mar 12, 2024 12:13 am
- Forum: N2K0183
- Topic: N2K0183 as a Tool to Analyse the N2K bus
- Replies: 3
- Views: 14785
Re: N2K0183 as a Tool to Analyse the N2K bus
Hello Tedfiddle, As per my email, you can use use the Actisense Reader to get information on the data that travels on the NMEA2000 bus. You need to Select Unidirectional ActisenseB in the RAW settings and check the box USB so that data is sent through the Serial P2 port (echoed in the USB port). In ...
- Tue Mar 05, 2024 10:10 pm
- Forum: Nmea2Wifi
- Topic: How to update Nmea2wifi firmware
- Replies: 29
- Views: 70464
Re: How to update Nmea2wifi firmware
Hello Waldemar, That driver is not only necessary to update the firmware using a USB cable but it is also necessary if the multiplexer has to receive or send nmea0183 data from/to a PC, through USB. I don't know if it is possible to install the driver on Windows11 ARM. Just saw here that some people...
- Mon Mar 04, 2024 9:43 am
- Forum: Nmea4Wifi
- Topic: Connecting to router in STN mode breaks NMEA out on p5
- Replies: 19
- Views: 1345
Re: Connecting to router in STN mode breaks NMEA out on p5
Hello Paul, I need to discuss the Heading Sentences with Dagnall. I answered too fast without noting to the requirement that you would not like to setup ST>P5. You should note that this is a very customised requirement and that could only be made once and not supported on future updates. I suggest w...
- Mon Mar 04, 2024 12:51 am
- Forum: Nmea4Wifi
- Topic: Connecting to router in STN mode breaks NMEA out on p5
- Replies: 19
- Views: 1345
Re: Connecting to router in STN mode breaks NMEA out on p5
Hello Paul, Good to hear! And thanks to report it to us! Let me tell you that me and Dagnall have been working to optimize even further the internal operation of the NMEA4WIFi multiplexer and we will possibly upload a new firmware in the next days. In regard to adding the 2 sentences to the Filters,...
- Sun Feb 25, 2024 10:17 pm
- Forum: N2K0183
- Topic: Open Networks & Hard Reset
- Replies: 0
- Views: 218
Open Networks & Hard Reset
Hello, Starting with version 2.0 of the N2K0183 firmware, it will be possible to: create an open (not protected) AP only network and/or also connect to an open (non protected) external network In order to achieve that, you just enter the string NULL in the password text box of the N2K0183 AP Network...
- Thu Feb 22, 2024 1:48 am
- Forum: Nmea4Wifi
- Topic: Connecting to router in STN mode breaks NMEA out on p5
- Replies: 19
- Views: 1345
Re: Connecting to router in STN mode breaks NMEA out on p5
Hello Paul, An oscilloscope could indeed reveal some differences in the P5 output waveform but it would be difficult to interpret them. The idle state of the waveform is LOW (about 0 volts) and when data is being sent out, it alternates between 0 and 5 volts. It will be difficult to derive the bytes...
- Wed Feb 21, 2024 7:07 am
- Forum: Nmea4Wifi
- Topic: Connecting to router in STN mode breaks NMEA out on p5
- Replies: 19
- Views: 1345
Re: Connecting to router in STN mode breaks NMEA out on p5
Hello Paul, I understand completely your set up. I think there are 2 possibilities: a) there is some bug neither detected when the multiplexer works with your setup or b) there is too much data that leads to traffic congestion of the P5 output buffer. I am only betting on 5% for a) and 95% for b) or...
- Fri Feb 16, 2024 3:51 am
- Forum: Nmea4Wifi
- Topic: Connecting to router in STN mode breaks NMEA out on p5
- Replies: 19
- Views: 1345
Re: Connecting to router in STN mode breaks NMEA out on p5
Hello Paul, Thank you for the extra information. 3 small notes: - do you get the IP the router gives to the multiplexer? With the shown settings, after you press SET, the IP should appear under the logo. - did you try your smartphone as a router (I mean as a hot spot)? - P5 working at 4800 could not...
- Tue Feb 13, 2024 9:26 pm
- Forum: Nmea4Wifi
- Topic: Connecting to router in STN mode breaks NMEA out on p5
- Replies: 19
- Views: 1345
Re: Connecting to router in STN mode breaks NMEA out on p5
Hello Paul, So you say that when you connect also to your router, everything works except that data out from P5 starts to fail. You should note the following: - P5 baud rate should be able to cope with data that arrives to the multiplexer and that is routed to P5 (is that 38.400 or 4800?) - when the...
- Tue Feb 13, 2024 3:07 am
- Forum: Nmea4Wifi
- Topic: Connecting to router in STN mode breaks NMEA out on p5
- Replies: 19
- Views: 1345
Re: Connecting to router in STN mode breaks NMEA out on p5
Hello Athertop, My feedback here is just based on your drawing. I am not familiar with the instruments and I would need to read the manuals in order to be more assertive. I assume that you AIS and you E80 have no internal GPS and location data is only available from the shown GPS. As per your descri...