Hello,

There was a bug. Version 2.2 will do it. Thank you for calling our attention to this bug.

Regards, Luis

Hello,

Yes, with TCP the multiplexer can only talk to one device. With UDP the multiplexer can send data to multiple devices. Normally I suggest TCP for device to multiplexer communication and UDP for multiplexer to devices communication.

Regards, Luis

Hello, Sorry but I have not seen your post till today. You can place solder between 2 pads in the PCB of the multiplexer and its behaves as a terminator. Doing this and if the multiplexer is one one end of the backbone you do not need for a terminator on this side. See the pictures (I placed a gray ...

Hello, This topic concerns the multiplexers that use the ESP32 module - NMEA3WIFI, NMEA4WIFI and N2K0183. I took the case of the NMEA4WIFI to describe this process, but the method is identical to the other two multiplexers. I use this method with Windows 10 and Windows 11. 1. Unzip the attached ZIP ...

Hello, Starting with versions: 8.2 of NMEA2WIFI 2.3 of NMEA3WIFI 6.2 of NMEA4WIFI 2.0 of the N2K0183 we changed the operation of the Nmea0183 serial output buffer (referred to as P2 in the N2K0183, P3 in the NNMEA2WWIFI and NMEA3WIFI and P5 in NMEA4WIFI). We use the example of the NMEA4WIFI multiple...

Hello Tedfiddle, As per my email, you can use use the Actisense Reader to get information on the data that travels on the NMEA2000 bus. You need to Select Unidirectional ActisenseB in the RAW settings and check the box USB so that data is sent through the Serial P2 port (echoed in the USB port). In ...

Hello Waldemar, That driver is not only necessary to update the firmware using a USB cable but it is also necessary if the multiplexer has to receive or send nmea0183 data from/to a PC, through USB. I don't know if it is possible to install the driver on Windows11 ARM. Just saw here that some people...

Hello Paul, I need to discuss the Heading Sentences with Dagnall. I answered too fast without noting to the requirement that you would not like to setup ST>P5. You should note that this is a very customised requirement and that could only be made once and not supported on future updates. I suggest w...

Hello Paul, Good to hear! And thanks to report it to us! Let me tell you that me and Dagnall have been working to optimize even further the internal operation of the NMEA4WIFi multiplexer and we will possibly upload a new firmware in the next days. In regard to adding the 2 sentences to the Filters,...

Hello, Starting with versions: 8.2 of NMEA2WIFI 2.3 of NMEA3WIFI 6.2 of NMEA4WIFI 2.0 of the N2K0183 it will be possible to: create an open (not protected) AP only network and/or also connect to an open (non protected) external network In order to achieve that, you just enter the string NULL in the ...