Hello Adam,
Could you run this tool
https://vela-navega.com/forum/viewtopic ... ester#p482
and check if you receive UDP data from the multiplexer? Placing the multiplexer in simulation mode.
Luis
Search found 434 matches
- Mon Oct 23, 2023 7:50 pm
- Forum: Nmea4Wifi
- Topic: Windows 11 Connectivity
- Replies: 4
- Views: 3666
- Mon Oct 23, 2023 5:03 pm
- Forum: Nmea4Wifi
- Topic: Windows 11 Connectivity
- Replies: 4
- Views: 3666
Re: Windows 11 Connectivity
Hello, I don't know how to solve the problem. Can only give some tips. In Windows 10 I can only have one application to receive UDP. I have a tool that I wrote and use to receive/transmit UDP TCP SERIAL. If I set the tool to receive UDP packets, other apps will not get those packets. It is like "the...
- Wed Sep 27, 2023 1:48 am
- Forum: Nmea4Wifi
- Topic: Cell phone hot spot
- Replies: 9
- Views: 8988
Re: Cell phone hot spot
Hello Cougar, 1) When the Nmea4Wifi only creates its wifi network you can connect your phone to the AP created by the multiplexer. In that case you will loose internet as the phone will be connected to the multiplexer and the multiplexer is not a modem (can not connect to the internet). The server/c...
- Wed Aug 16, 2023 4:00 pm
- Forum: Nmea4Wifi
- Topic: WIFI connection disappears
- Replies: 4
- Views: 4425
Re: WIFI connection disappears
Hello Christophe, I am sorry to know about your problem. There is something wrong. The multiplexer should not become so hot. I am sailing in Greece and we had 40 centigrade degrees and that does not affect the operation of the multiplexer. You should be able to touch any component with your finger w...
- Sun Jul 30, 2023 2:13 pm
- Forum: Nmea4Wifi
- Topic: Problems with the Navionics APP and the NMEA datasets
- Replies: 8
- Views: 7546
Re: Problems with the Navionics APP and the NMEA datasets
Hello Theo, I am sorry for not coming to your email. Your problem is the following: you have a depth sensor that transmits DPT nmea0183 messages. That sensor does not adds the checksum to those messages. You would like a custom version of the multiplexer that adds that checksum Could we define the i...
- Fri Jul 28, 2023 3:42 pm
- Forum: Nmea3Wifi
- Topic: Problem with UDP transmission
- Replies: 1
- Views: 2975
Re: Problem with UDP transmission
Hello,
The multiplexer can not send out on UDP what it receives on UDP. There is no UDP>UDP routing box. Are you using OpenCPN only? As far as i know you could send your wind data by UDP directly to OpenCPN. Or you could route UDP>TCP and create e receiving TCP connection on OpenCPN.
Regards, Luis
The multiplexer can not send out on UDP what it receives on UDP. There is no UDP>UDP routing box. Are you using OpenCPN only? As far as i know you could send your wind data by UDP directly to OpenCPN. Or you could route UDP>TCP and create e receiving TCP connection on OpenCPN.
Regards, Luis
- Tue Jul 18, 2023 1:22 am
- Forum: Designing Wifi Multiplexers
- Topic: How to connect the NASA AIS Engine 3 to a multiplexer
- Replies: 0
- Views: 11878
How to connect the NASA AIS Engine 3 to a multiplexer
Hello, The NASA AIS Engine 3 unit has a DB9 female connector from which we can get the signal to drive a multiplexer. There is much confusion about which signals we should use and to clarify this I went to a drawer where I keep old electronic instruments and picked up the NASA AIS which I used in my...
- Mon Jul 17, 2023 7:22 pm
- Forum: Nmea4Wifi
- Topic: no update button on webpage
- Replies: 7
- Views: 4756
Re: no update button on webpage
Hello,
I will load version 34 here and will try to come from 34 to 60. Will paste here what I find. Please wait.
Regras, Luis
I will load version 34 here and will try to come from 34 to 60. Will paste here what I find. Please wait.
Regras, Luis
- Fri Jul 14, 2023 3:03 pm
- Forum: Nmea4Wifi
- Topic: no update button on webpage
- Replies: 7
- Views: 4756
Re: no update button on webpage
Hello,
I do not know the present version that you are using. I think if you type 192.168.4.1:82 you can do the update.
Regards, Luis
I do not know the present version that you are using. I think if you type 192.168.4.1:82 you can do the update.
Regards, Luis
- Sun Jun 18, 2023 10:20 pm
- Forum: Nmea3Wifi
- Topic: NMEA3WIFI ext netw and internet access
- Replies: 6
- Views: 5110
Re: NMEA3WIFI ext netw and internet access
Hello, You say "the devices on the internal network". Could you please clarify? If the multiplexer only creates its network and, for example, you connect your smartphone to the multiplexer, then the smartphone will not have internet access. If, on the other hand, the multiplexer connects to an exist...