Hello,

I am sorry but I could not completely understand your problem. Please describe it as fully as possible (vous pouvez ecrire en français).

Please make sure that you have firmware version 2.6!

Regards Luis

Hello,

OK! If the module is the same as the one in the multiplexer you can use the small sketch in this topic. I used it with Arduino Ide version 1.8.7 without problems. Please read and follow the options that are commented in the sketch.

Regards Luis

Hello,

Are you trying to flash a module that you got elsewhere or the module included in the multiplexer?

Please explain.

Regards Luis

Hello,

Thank you. Did you use bin 58? Please confirm. In version 58 I send depth in feet.

Greetings from Greece (sailing from Amorgos to Patmos) Luis

Hello, I need more information about your setup in order to comment. Please read the document that I gave you the link in order to know what can be and what cannot be translated. May be rudder angle could be implemented with a software modification. For battery voltage I think an hardware modificati...

Hello, As far as I understand your question you have an USB cable connecting the multiplexer to a PC. I do not know if your are sending data from the PC to the multiplexer, sending data from the multiplexer to the P3 or both. The important thing to remember is that data going out on the P5 output is...

Hello, Thank you for your post. Does the PCB inside the box in the second picture refers to Nmea2Wifi? What are the dissensions? I could not completely understand the meaning of your lists. In relation to the SeaTalk1 to Nmea0183 conversion, I used the document shown here: http://www.thomasknauf.de/...

Hello, There are 2 red leds. One is a Smd led on the voltage regulator pcb (red pcb). That light should be always on. If it is not on, a power supply problem is present and you need to return the unit so that I can send a new one. The other red led is the one that signals output being sent on P5. Th...

Hello Didier,

Do you mean that nothing happens? Does the voltage regulator works? The voltage regulator is a small red pcb with a red light. Is that red light on? Please clarify.

Regards Luis

Dear Andrew, I am sorry for this problem. There was a repeated error in the conversion software. There is a topic on the Nmea4Wifi forum about wrong Depth. I kindly ask you if you could flash binary file version 57 that I have just uploaded. I appreciate if you could report if the error is fixed. Ki...