Hello,

With the Nme2Wifi multiplexer you need one converter like the one that I pointed out in the ali express link.

With the Nmea4Wifi multiplexer you can use a standard USB cable.

Regards, Luis

Hello Gunter, I am not sure if I understood your question. I assume that you have a Nme2Wifi multiplexer that you assembled. And that your problem is to receive Nmea 0183 data on a COM port in Windows. When you refer to my software I assume that you refer to the Nmea4Wifi tool that I recently made a...

Hello, This tool has the name Nmea4Wifi and can be used it to setup the Nmea4Wifi multiplexer. However it is a powerful tool to test Nmea 0183 sentences reception and transmission. If you forget the commands related to interaction with the Nmea4Wifi multiplexer, you can use it with any other multipl...

Hello, (from November 2019 and for testing the transmission of Nmea 0183 sentences the tool Nmea0183Tester is better) This tool has the name Nmea4Wifi and can be used it to setup the Nmea4Wifi multiplexer. However it is a powerful tool to test Nmea 0183 sentences reception and transmission. If you f...

nmea4wifi.gif The Nmea4Wifi multiplexer allows bidirectional serial and wifi communication between your smart-phone, tablet or laptop and your boat instrumentation. The Nmea4Wifi multiplexer can be simply configured using a Web Browser. It has four opto-isolated Nmea 0183 input ports and one Nmea 0...

Hello, Thank you for your the interest in the multiplexer. The multiplexer is only capable of reading SeaTalk data. It would be necessary to make a small change in the hardware to output SeaTalk data. The Help file has a 830KB. Please check again if you can download and open it. I am trying to conve...

nmea4wifi.gif The Nmea4Wifi multiplexer allows bidirectional serial and wifi communication between your smart-phone, tablet or laptop and your boat instrumentation. The Nmea4Wifi multiplexer can be simply configured using a Web Browser. It has four opto-isolated Nmea 0183 input ports and one Nmea 0...

Hello, Starting with firmware revision v.56 the multiplexer can accept SeaTalk data on Serial Port P1 and convert that data to the Nmea 0183 format. In order to connect a SeaTalk cable to the Nmea2Wifi multiplexer you should follow the following picture. seatalk-connection1.jpg You can also take the...

Hello,

Thank you for your interest. Not for Nmea2K, sorry. Only SeaTalk1 >>> Nmea 0183.

Best Regards, Luis

Hello, Here is the list of Binary files that I have released. I truly suggest that you use the last one. NMEA2WIFIV30.bin (September 2017) - initial release. NMEA2WIFIV40.bin (October 2017) - major release introducing bidirectional transmission as described here . NMEA2WIFIV41.bin (October 2017) - i...