NmeaToWifi Tool for Windows

Discussion and support for the Nmea4Wifi multiplexer - a 4-input Nmea 0183 wifi multiplexer.
Post Reply
Luis Sa
Site Admin
Posts: 845
Joined: Thu May 04, 2017 4:12 am

NmeaToWifi Tool for Windows

Post by Luis Sa » Thu Jan 03, 2019 2:55 am

Hello,

This tool has the name Nmea4Wifi and can be used it to setup the Nmea4Wifi multiplexer. However it is a powerful tool to test Nmea 0183 sentences reception and transmission. If you forget the commands related to interaction with the Nmea4Wifi multiplexer, you can use it with any other multiplexer. You can test a variety of situations. Just one example - you can send a file containing Nmea sentences to the Nmea2Wifi or to the Nmea4Wifi multiplexer using the UDP protocol and set the multiplexer to send back the received sentences by wifi using TCP. Then you can set the tool to record in a file the sentences received by TCP. Finally you can compare the initial sent file with the received recorded file to see if there was any error or loss. In the future I may post a video tutorial about this tool.

tool-setting.png

You can download the tool below. You should download the file Nmea4Wifi.zip and extract it to an empty folder. Then you execute the file Nmea4Wifi.exe. This file was released in January of 2019. In November 2019, I made small improvements contained in the file Nmea4Wifi_R1.zip and later in the file Nmea4Wifi_R2.zip. These new archives only contain the executable Nmea4Wifi.exe which should replace the old ones. There is a "What is New" menu that explain the changes. Revision 2.0 is the final revision of this tool. I will now concentrate on the Nmea0183Tester tool which has similar capabilities.


Regards, Luis
Attachments
Nmea4Wifi_R2.zip
(58.42 KiB) Downloaded 888 times
Nmea4Wifi_R1.zip
(58.41 KiB) Downloaded 780 times
Nmea4Wifi.zip
(917.6 KiB) Downloaded 1237 times

Post Reply