The popular Navionics Boating App is now capable of displaying AIS targets over the maps. In order to get it working you need:
a) choose UDP protocol and set port number equal to 2000. I tested this last week when I was sailing in Turkey
b) or use TCP and set
- IP address = 192.168.15.1
- Port Number = 39150
NmEaWiFi..192.168.15.1
Note the 2 points ".."! They divide the entered text in 2 parts. The text to the left of ".." is taken as the ssid network name. The text to the right of ".." is taken as the IP address. As there are no errors (the ssid name is a valid one and the IP address is a valid one), the multiplexer will create, in the shown example, a network with name NmEaWiFi and its IP address will be 192.168.15.1.
Regards, Luis
Edited on October, 8, 2019 - After you set a new IP address by the described method, the IP will only start to work when you do a normal Reset or you switch off and on the power supply. If you do that you need to specify this new IP in the web browser to regain access to the settings webpage!