unable to us port 3 or port 4

Discussion and support for the Nmea4Wifi multiplexer - a 4-input Nmea 0183 wifi multiplexer.
Post Reply
Baps84
Posts: 1
Joined: Fri Jun 25, 2021 4:10 pm

unable to us port 3 or port 4

Post by Baps84 » Sat Jun 26, 2021 9:50 am

Hi,
I got an issue with my new nmea4wifi, The is firmware 4.4, I have not updated it. It came like that
I'm able to use port 1and 2. But i'm not able to use port 3 and 4.
All the ports are set as following : 4800

The issue :
if i plug the GPS or Advansea on the port 1 or 2 that works.
If I plug the gps or Advansea on the port 3 or 4 that doesn't work. Something appears, but those are not nmea sentences. There are some /*/&&é characters instead.
If I plug the AIS on the port 3 or 4 that doesn't work. No signal at all.

This is the first insllation (just bought the nmea4wifi), and it has never worked correctly.

If some one has an idea...

Best regards

Luis Sa
Site Admin
Posts: 845
Joined: Thu May 04, 2017 4:12 am

Re: unable to us port 3 or port 4

Post by Luis Sa » Sat Jun 26, 2021 11:08 am

Hello,

Could you specify if your multiplexer is SMD type or TH type? Please email me at luis@vela-navega.com to find a solution.

Regards, Luis

Post Reply