Shorted the Multiplexer!

Discussion and support for the Nmea4Wifi multiplexer - a 4-input Nmea 0183 wifi multiplexer.
Post Reply
olly_love
Posts: 10
Joined: Mon Jul 26, 2021 10:45 am

Shorted the Multiplexer!

Post by olly_love » Mon Feb 20, 2023 1:38 pm

Slight cock up today,

I accidently hit the Pos terminal with the Neg and have shorted the multiplexer

unfortunately the item CB area in the square has burnt away and the resister has gone,

any thoughts what might else have blown and what would i need to replace!

Slight idiot moment working in a small locker space
Attachments
Untitled.png

Luis Sa
Site Admin
Posts: 845
Joined: Thu May 04, 2017 4:12 am

Re: Shorted the Multiplexer!

Post by Luis Sa » Mon Feb 20, 2023 3:27 pm

Hello

Sorry to hear about that. I wonder what your electronic skills. I f you send the multiplexer to me, I will repair it. I only want you to pay the shipping cost (about 6 euros) and any parts that could be destroyed.

Before doing that, remove the Esp32 module and the ics that are in the sockets. To test the Esp32 module once it is out of the socket, power it with a USB cable and check if it creates the AP network. Please contact me by email for further information on what you can do.

Regards, Luis

Post Reply