About the Nmea1ST
Posted: Tue Mar 30, 2021 1:55 am
Hello,
The Nmea1ST is a bridge between SeaTalk1 and Nmea0183. It runs on a ESP32 development module. It needs to be fully tested and some conversions from the Nmea to SeaTalk1 direction need to be added. I publish here the software and the schematics of a possible hardware.
The software needs to be compiled and flashed using the Arduino IDE. In order to do that you should unzip the 7 ino files contained in the ZIP to a folder with the name of NMEA1ST that you need to create inside your Arduino sketchbook folder.
In a following topic I suggest a simpler circuit to run the software for testing purposes.
Regards, Luis
The Nmea1ST is a bridge between SeaTalk1 and Nmea0183. It runs on a ESP32 development module. It needs to be fully tested and some conversions from the Nmea to SeaTalk1 direction need to be added. I publish here the software and the schematics of a possible hardware.
The software needs to be compiled and flashed using the Arduino IDE. In order to do that you should unzip the 7 ino files contained in the ZIP to a folder with the name of NMEA1ST that you need to create inside your Arduino sketchbook folder.
In a following topic I suggest a simpler circuit to run the software for testing purposes.
Regards, Luis