The Nmea1ST is a bridge between SeaTalk1 and Nmea0183. It runs on a ESP32 development module. It needs to be fully tested and some conversions from the Nmea to SeaTalk1 direction need to be added. I publish here the software and the schematics of a possible hardware.
The software needs to be compiled and flashed using the Arduino IDE. In order to do that you should unzip the 7 ino files contained in the ZIP to a folder with the name of NMEA1ST that you need to create inside your Arduino sketchbook folder.
In a following topic I suggest a simpler circuit to run the software for testing purposes.
Discussion about the Nmea1ST - bidirectional bridge between SeaTalk1 and Nmea0183
1 post • Page 1 of 1