New - Nmea3Wifi Multiplexer!!!

Discussion and support for the Nmea3Wifi multiplexer - a 2-input Nmea 0183 wifi multiplexer with a full bidirectional SeaTalk1 input/output port.
Post Reply
Luis Sa
Site Admin
Posts: 667
Joined: Thu May 04, 2017 4:12 am

New - Nmea3Wifi Multiplexer!!!

Post by Luis Sa » Mon Nov 29, 2021 12:56 am

Hello,

A new multiplexer with full support for the SeaTalk1 bus will be available on the middle of December, 2021. You can see its characteristics by visiting this webpage.

Regards, Luis

opalonkassidy
Posts: 1
Joined: Fri Mar 18, 2022 11:56 am

Re: New - Nmea3Wifi Multiplexer!!!

Post by opalonkassidy » Fri Mar 18, 2022 1:36 pm

Hello Luis and Everyone,

I am very happy with this NMEA0183/SeaTalk-WifiMux that I purchased a few weeks ago.
Very good manufactured and fonctional.

My concern is relevant to the HDG sentences towards the Seatalk 84/89 datagrams Conversion.
I connected on NMEA input1 a $HCHDG Compass and on input 2 a $GPHDG GPS/HD Antenna.
Both are well reconized but not converted to 84/89 datagrams.

Thanks for reading and any suggestion. Looking forwards to hearing from you
Attachments
NMEA3Wifi HDG-Debug.jpg

Luis Sa
Site Admin
Posts: 667
Joined: Thu May 04, 2017 4:12 am

Re: New - Nmea3Wifi Multiplexer!!!

Post by Luis Sa » Sat Mar 19, 2022 12:14 pm

Hello,

Dagnall has implemented the addition HDG to ST89 and ST99. Please wait.

Regards, Luis

Post Reply