Note for users that participated in the testing

Discussion and support for the N2K0183 gateway between the Nmea2000 bus and Nmea0183 devices. This is a multiplexer with WiFi, 2 input and 1 output Nmea 0183 ports and bidirectional Nmea2000 communications.
Post Reply
Luis Sa
Site Admin
Posts: 834
Joined: Thu May 04, 2017 4:12 am

Note for users that participated in the testing

Post by Luis Sa » Sat Jan 20, 2024 11:11 pm

Hello,

This post only concerns users that help us in testing the multiplexers and have the 1st hardware prototype. In that hardware, the internal pads that support the input PX serial port do not exist and (THIS IS THE PROBLEM) the Can Bus pins used by the ESP32 are different from the final hardware. In order for those users to continue to use the prototype hardware with future improved firmwares, we will publish 2 BIN files whenever we update the firmware. One file has an appended X in its name as shown in the picture.

folder.gif
folder.gif (5.47 KiB) Viewed 2405 times

That X means that the BIN uses the Can Bus pins of the 1st prototype. So the user only has to change the normal URL for the download by appending that X in the filename. Here are the 2 links that I am referring to for the case of the initial release:

https://www.vela-navega.com/n2k0183/N2K0183V130.BIN
https://www.vela-navega.com/n2k0183/N2K0183V130X.BIN

Regards, Luis

Post Reply