Raymarine Autopilot EV1

Discussion and support for the N2K0183 gateway between the Nmea2000 bus and Nmea0183 devices. This is a multiplexer with WiFi, 2 input and 1 output Nmea 0183 ports and bidirectional Nmea2000 communications.
Post Reply
Baltic Sailor
Posts: 5
Joined: Mon Feb 04, 2019 6:00 pm

Raymarine Autopilot EV1

Post by Baltic Sailor » Thu Mar 21, 2024 1:58 am

To control the newer Raymarine EV-200 Autopilot requires to have the PGN 126208. Is this PGN supported?

quote of Opencpn manual:
To make the EVO pilot work (or work well if you want) the most important is PGN 126208, which is the general “I can transfer pretty much anything” PGN, which is similar for other vendors
Top
Byron
Posts: 12
Joined: Sat Jan 02, 2021 2:41 pm

Re: Raymarine Autopilot EV1

Post by Byron » Sat Mar 30, 2024 9:04 am

I believe N2K0183 uses the format "Actisense N2K ASCII" for NMEA200/SeaTalkNG communitcation and thus it will support all known PGNs.

The only limitations withing N2K0183 would be which PGNs are converted to 0183 sentences and this is conversion is not needed to control an EV Pilot.

You will just need an App that offers a Pilot control and supports "Actisense N2K ASCII".
Top
Post Reply

Return to “N2K0183”