Hello,
First of all, thank you for your great work.
İn my case, there are differences between seatalk and nmea 0183 sentences which i receive from wifi.
Some nmea data is missing in seatalk data.
We have used your latest setup to get nmea sentences.
And also standard ST60+ displays can show battery levels. But there is no data for that in seatalk or nmea0183 sentenceses.
Sentences which I have received at the bottom.
If you can lead me to right direction to solve my problems that would be great.
Thank you very much
GA
Seatalk line data (nmea2wifi Modul)
GP RMC - Recommended Minimum Navigation Information
HC HDM - Heading - Magnetic (*)
WI MWV - Wind Speed and Angle (*)
SD DBT - Depth below transducer (*)
VW VHW - Water speed and heading (*)
II VLW - Distance Traveled through Water
Nmea 0183 Line data (nmea2wifi Modul)
GP GGA - Global Positioning System Fix Data
GP GLL - Geographic Position - Latitude/Longitude (*)
GP GSV - Satellites in view
GP RMC - Recommended Minimum Navigation Information
GP GSA - GPS DOP and active satellites
SD DBT - Depth below transducer
SD DPT - Depth of Water (*)
VW VHW - Water speed and heading (*)
VW VLW - Distance Traveled through Water
GP ZDA - Time & Date - UTC, day, month, year and local time zone (*)
GP VTG - Track made good and Ground speed (*)
EC MWV - Wind Speed and Angle (*)
Nmea 0183 Line data (form RS422)
VW MTW - Mean Temperature of Water (only here)
GP GGA - Global Positioning System Fix Data
GP GLL - Geographic Position - Latitude/Longitude (*)
GP GSV - Satellites in view
GP RMC - Recommended Minimum Navigation Information
GP VTG - Track made good and Ground speed (*)
GP ZDA - Time & Date - UTC, day, month, year and local time zone (*)
EC MWV - Wind Speed and Angle (*)
GP GSA - GPS DOP and active satellites
SD DBT - Depth below transducer
SD DPT - Depth of Water (*)
VW VHW - Water speed and heading (*)
VW VLW - Distance Traveled through Water
Nmea data (which I would like to receive)
RSA - Rudder angle (requires rudder reference unit) unit should be checked!
XDR - Battery level
Raymarine equipments
A70 - Multi-function display
SPX 10 - SPX SmartPilot System
ST60+ - displays
Nmea Datas
Re: Nmea Datas
Hello,
Thank you for your post. Does the PCB inside the box in the second picture refers to Nmea2Wifi? What are the dissensions?
I could not completely understand the meaning of your lists. In relation to the SeaTalk1 to Nmea0183 conversion, I used the document shown here:
http://www.thomasknauf.de/rap/seatalk2.htm
I can look to the points that you refer but unfortunately, I have no time until the end of September. I would be grateful if you could confirm the correct reception of converted values u,sing firmware 5.7, namely DBT.
Best Regards, Luis
Thank you for your post. Does the PCB inside the box in the second picture refers to Nmea2Wifi? What are the dissensions?
I could not completely understand the meaning of your lists. In relation to the SeaTalk1 to Nmea0183 conversion, I used the document shown here:
http://www.thomasknauf.de/rap/seatalk2.htm
I can look to the points that you refer but unfortunately, I have no time until the end of September. I would be grateful if you could confirm the correct reception of converted values u,sing firmware 5.7, namely DBT.
Best Regards, Luis
Re: Nmea Datas
Hello,
Yes second picture is our nmea2wifi module. I will return about dissensions.
We are getting different nmea sentences form different ports (setalk or nmea0183).
And also we couldn't get battery level and rudder angle.
So I'm trying to understand, Why there are different data sentences from different ports?
Thank you, GA
PS: How could i confirm the correct reception of converted values?
Yes second picture is our nmea2wifi module. I will return about dissensions.
We are getting different nmea sentences form different ports (setalk or nmea0183).
And also we couldn't get battery level and rudder angle.
So I'm trying to understand, Why there are different data sentences from different ports?
Thank you, GA
PS: How could i confirm the correct reception of converted values?
Re: Nmea Datas
Hello,
I need more information about your setup in order to comment. Please read the document that I gave you the link in order to know what can be and what cannot be translated.
May be rudder angle could be implemented with a software modification. For battery voltage I think an hardware modification is needed.
Regards Luis
I need more information about your setup in order to comment. Please read the document that I gave you the link in order to know what can be and what cannot be translated.
May be rudder angle could be implemented with a software modification. For battery voltage I think an hardware modification is needed.
Regards Luis