Page 2 of 2
Re: No WiFi
Posted: Mon Jun 22, 2020 9:40 pm
by Luis Sa
Hello,
If you can see simulation, it means that you were able to flash the module with the 63 firmware. So I assume the problem is solved!
Regards, Luis
Re: No WiFi
Posted: Wed Jul 08, 2020 10:03 am
by jbonde
Did a reinstall in the boat and same thing happens. When everything is connected (12V, Seatalk and NMEA inputs) the AP pops up for a while and then disappears. Could there be anything I should check for at the board or the environment that could cause the Esp flash to erase? For your information I have another AP at the boat (different SSID) and it works fine.
Re: No WiFi
Posted: Tue Jul 28, 2020 2:24 pm
by jbonde
Still no success making it work. Did try to install on another boat but same thing happens. Tried to flash the NMEA2WIFIV63.bin with OTA as well as the ESP8266Flasher_64.exe but the AP disappears when trying to connect. If only the OTA_BLINK.bin is installed it is OK to connect and access the 192.168.4.1:82/update page but this is the far as I can get.