How to update Nmea2wifi firmware

Discussion and support for the Nmea2Wifi multiplexer - a 2-input Nmea 0183 wifi multiplexer.
Juanvi
Posts: 3
Joined: Tue Feb 27, 2018 7:18 pm

Re: How to update Nmea2wifi firmware

Post by Juanvi » Sat May 23, 2020 7:49 pm

Hi Luís,

I tried to update the NMEA2WIFI multiplexer to the latest version 6.2 y 6.3 but after the flash of the firmware, the multiplexer didn't start. I tried several times without success, so I had to revert to version 5.8 that has worked.


When I restart it, the blue light does not stop flashing and the Wi-Fi network does not appear, if I go back to version 5.8 everything works.

The USB Cable is correct and the port reconnects it perfectly

Thank you

Luis Sa
Site Admin
Posts: 535
Joined: Thu May 04, 2017 4:12 am

Re: How to update Nmea2wifi firmware

Post by Luis Sa » Sun May 24, 2020 10:30 pm

Hello Juanvi,

Please check this forum again. I have revised this topic. Please try to flash the OTA_BLINK.bin file as described.

Regards, Luis

Juanvi
Posts: 3
Joined: Tue Feb 27, 2018 7:18 pm

Re: How to update Nmea2wifi firmware

Post by Juanvi » Thu Jun 04, 2020 3:33 pm

Thank you very much Luis, I have managed to update it to version 6.3

Luis Sa
Site Admin
Posts: 535
Joined: Thu May 04, 2017 4:12 am

Re: How to update Nmea2wifi firmware

Post by Luis Sa » Thu Jun 04, 2020 5:14 pm

Hello,

Thank you for the feedback. I don't understand why it didn't work in the normal way but at least we found a way to update shall it be necessary.

Regards, Luis

Post Reply