Raymarine ST60 to Garmin Plotter 7040XSV
Posted: Thu Apr 29, 2021 5:33 pm
Congratulations on your product.
I want to connect ST60 RAYMARINE with Garmin GPSMAP XSV plotter with NMEA2WIFI.
Following the manual I have connected it as follows:
a.- positive of SEATALK1 in 12V and in A1
b.- negative of SEATALK1 on GND
c.- data cable from SEATALK1 (yellow) to B1
the green LED flashes, as the manual says.
But I have doubts ... I can't see the SEATALK1 data on the plotter. I have configured the NMEA0183 inputs on the Garmin chartplotter as standard.
Following the Garmin manual I connect:
a.- brown wire (Internal port 1 RX (input) on A3
b.- black cable (negative) in B3
But I don't see data on the Garmin chartplotter. Can you help me?
Thanks
I want to connect ST60 RAYMARINE with Garmin GPSMAP XSV plotter with NMEA2WIFI.
Following the manual I have connected it as follows:
a.- positive of SEATALK1 in 12V and in A1
b.- negative of SEATALK1 on GND
c.- data cable from SEATALK1 (yellow) to B1
the green LED flashes, as the manual says.
But I have doubts ... I can't see the SEATALK1 data on the plotter. I have configured the NMEA0183 inputs on the Garmin chartplotter as standard.
Following the Garmin manual I connect:
a.- brown wire (Internal port 1 RX (input) on A3
b.- black cable (negative) in B3
But I don't see data on the Garmin chartplotter. Can you help me?
Thanks