Receive data via Wifi and send it to a VHF station connected to Nmea2Wifi
Posted: Mon Nov 29, 2021 6:56 pm
Good afternoon, I would appreciate if you could help me, after reading in the forum and trying in a thousand ways I cannot receive the Gps data via Wifi and transmit it to the station.
SETTING
Nmea2Wifi VersiĆ³n 5.0 - firmware 6.6
GPS Furuno Elite FS7 IP address 192.168.1.45 Port 10110
Standard Horizon GX1300 transmitter
NMEA GPS Input (+) to B3
NMEA GPS Input (-) to A3
NMEA DSC Output (+) to A2
NMEA DSC Input (-) to B2
ALSO CONNECT TO EXTERNAL NETWORK
I am not sure how to configure the serial ports so that the GPS coordinates reach the VHF station
Thank you
SETTING
Nmea2Wifi VersiĆ³n 5.0 - firmware 6.6
GPS Furuno Elite FS7 IP address 192.168.1.45 Port 10110
Standard Horizon GX1300 transmitter
NMEA GPS Input (+) to B3
NMEA GPS Input (-) to A3
NMEA DSC Output (+) to A2
NMEA DSC Input (-) to B2
ALSO CONNECT TO EXTERNAL NETWORK
I am not sure how to configure the serial ports so that the GPS coordinates reach the VHF station
Thank you