Vela Navega Forum

Hi

I have a NEMA2WiFi TH

I have flashed the WiFi module with the latest firmware and tested it powered by USB
It works in so far as I can see the home page at 1892.168.4.1
The Simulation Mode also works to Navionics

When inserted into the main NEMA2WfIF board again both the Home Page and Simulation mode works picked up via Navionics
However, Navionics cannot connect in normal AP mode with nothing connected to a NEMA input, is this normal ?

I am Sending NEMA to A2,B2 form a MAIANA AIS and I do see the LED blink every couple of minutes.

Your help will be appreciated

Ta

JoeW

Hello JoeW,

I wonder if you could clarify the problem. I not understanding. Sorry.

Regards, Luis

OK

If I have no nmea signal or fead into the NMEA2WIFI

Will Navionics connect?

Hello,

If you enter simulation mode and Navionics sees the fictional data, then, when data arrives at the inputs, Navionics will see it as well.

Luis

Luis

Understood thank you.

I will double check my NMEA source

Thank you

JoeW