Bow Roller

Discussions on how to get parts for the Beneteau Oceanis 40 sailing boat.
Post Reply
Luis Sa
Site Admin
Posts: 171
Joined: Thu May 04, 2017 4:12 am

Bow Roller

Post by Luis Sa » Sat Sep 16, 2017 3:25 am

Hello,

This is the only bow roller that I found online and that fits the anchor assembling:

bow-roller.jpg

It is Osculati part number 01.219.95 and the important point is the width. This part has a 88 mm width and an internal diameter of 13mm. The available width on the bow assembling is about 90 mm so we can use 2 1 mm thick washers on both sides.

Regards, Luis

Luis Sa
Site Admin
Posts: 171
Joined: Thu May 04, 2017 4:12 am

Re: Bow Roller

Post by Luis Sa » Fri Sep 21, 2018 10:15 am

Hello,

In the nautical shop near the fish market in Aegina town, I purchased a bow roller in hard black plastic. I keep it as a spare.

Regards Luis

Post Reply