Bow Roller
Posted: Sat Sep 16, 2017 3:25 am
Hello,
This is the only bow roller that I found online and that fits the anchor assembling:
It is Osculati part number 01.219.95 and the important point is the width. This part has a 88 mm width and an internal diameter of 13mm. The available width on the bow assembling is about 90 mm so we can use 2 1 mm thick washers on both sides.
Regards, Luis
This is the only bow roller that I found online and that fits the anchor assembling:
It is Osculati part number 01.219.95 and the important point is the width. This part has a 88 mm width and an internal diameter of 13mm. The available width on the bow assembling is about 90 mm so we can use 2 1 mm thick washers on both sides.
Regards, Luis