Inox Bow Protection

Discussions on how to get parts for the Beneteau Oceanis 40 sailing boat.
Post Reply
Luis Sa
Site Admin
Posts: 843
Joined: Thu May 04, 2017 4:12 am

Inox Bow Protection

Post by Luis Sa » Sat Sep 16, 2017 9:54 pm


When Margarida was in Burriana during the winter there was another Oceanis 40 there, that had a bow protection made in inox. It was extremely well done. Later, when Margarida was in Porto, I tried to get someone to do something similar. I bought a 4 mm sheet of inox 316 and took a mould. Then the contracted expert tried to shape the inox sheet to the bow of Margarida. But uit was impossible to get a perfect fit because the bow was not completely straight. The piece was placed with 4 screws and we used a lot of white Sika to cover/connect the protection to the boat.


The result is not 100% perfect but, at least, no more crashes on the gelcoat made by the anchor!


Regards, Luis

Post Reply