Page 1 of 1

Inox Bow Protection

Posted: Sat Sep 16, 2017 9:54 pm
by Luis Sa
Hello,

When Margarida was in Burriana during the winter there was another Oceanis 40 there, that had a bow protection made in inox. It was extremely well done. Later, when Margarida was in Porto, I tried to get someone to do something similar. I bought a 4 mm sheet of inox 316 and took a mould. Then the contracted expert tried to shape the inox sheet to the bow of Margarida. But uit was impossible to get a perfect fit because the bow was not completely straight. The piece was placed with 4 screws and we used a lot of white Sika to cover/connect the protection to the boat.

inox-bow-protection.jpg

The result is not 100% perfect but, at least, no more crashes on the gelcoat made by the anchor!

bow-protection.jpg

Regards, Luis