Nmea4Wifi

FACTORY SETTINGS

Pressing the Set Factory Defaults button in the browser settings page is the same as to force an hardware reset of the system by pressing the "Boot" button on the Esp32 Wemos module. Also when you press New on the File menu of Nmea4Wifi Tool you fill the work space with the default settings. The factory setting uses the following parameters:

• Mode: Access Point Only.
•  Ssid: NMEA4WIFI.
• Password: 12345678.
• IP Address: 192.168.4.1
• Wifi Protocol: UDP.
• UDP Port Number: 2000.
• Serial Ports P1, P3 and P4 Baud Rates: 4800.
• Serial Ports P2 and P5 Baud Rates: 38400.
• Serial Output P5: none.
• UDP Output: P1 and P2.